Wreck diving is often associated with recreational diving and exploring shipwrecks. While shipwrecks are the traditional sites for wreck diving, an increasing trend is to scuttle retired ships to create artificial reef sites. Continue reading to learn more about wreck diving. Here are some tips to help you get started. First, get your equipment ready! There are many kinds of equipment. Getting the right kind of gear can make the difference between a fun and dangerous dive.
Non-penetration wreck diving
These are the basics to help you get started with scuba diving. First, wrecks can be used as a fishing spot, so divers need to be aware of lines and nets. They may also find themselves in dangerous terrain with sharp edges. Additionally, currents can push them away from the places they want. While it's not advisable to dive in this type of terrain, non-penetration wreck diving is a good option.
Technical penetration diving may seem easier than it is, however, there are still dangers. There are several dangers to diving in the light area, including overhead hazards and proximity to the wreck structure. Also, you could get caught in narrow passageways. Silt and mud may also be present in some wrecks, which can greatly reduce visibility and make it difficult for divers to keep their eyes open. Non-penetration wreck diving allows the diver to stay within the zone of light and move to an exit point.
Surveying a sunken wreck
Not only are traditional surveys required, but also the use of specific equipment and an in-depth knowledge of the maritime history surrounding the wreck must be done. Depending on the accuracy and time required, the survey method could include a GPS location fix, tape baseline, offset, and ties measurements. There are many methods that can be used to survey a sunken wreck.
A shipwreck inspection is intended to locate and identify the ship. It should identify historical events, navigational hazards, and environmental conditions. The survey report should include a description of the vessel's structures, the incident that resulted in its sinking, and any other archeological studies. The site should be able to be plotted on an nautical chart to allow for precise measurements.
Equipment is required
Know everything you can about a shipwreck. Its layout, key points and hazards are all important. Knowing these things will help you prepare for your dive and minimize the chances of an accident. You'll find information about all the equipment required to dive a shipwreck. This checklist should be read before you dive.
Proper buoyancy control will ensure you don't lose your way in darkness. Wreck diving requires good buoyancy control. Deep water diving is dangerous without a weight belt and a buoyancy tank. You will have a lot of fun diving if you have a weight belt. These two pieces are essential for your safety and the safety of all others.