Tech dive gear will allow you to go deeper under the water. These specialty gears have features that are not available in recreational diving equipment. BCDs that are sidemount or backplate-wing can be used as examples. If you're serious about diving in technical environments, you'll likely need advanced regulators, tanks, and computers as well. This article will show you what to look out for in gear that suits your needs.
Equipment for technical diving
Tech diving gear is modular. It can be customized to fit your needs. A tech BCD consists of a backplate made from steel or aluminum, a harness and an air bladder. D-Rings and other components can be added to the harness to make it fit your body. There are many options for wings. They come in different sizes and configurations. Even a single tank can be used to customize your gear.
Types
There are many variations between technical and recreational divers equipment. Each dive requires different equipment. While recreational divers may use a regular BCD, tech divers often need special backplate/wings and sidemount BCDs. They also need advanced tanks, regulators, and computers. This article will show you the differences in these two types of gear, and tell you what to look out for when choosing technical diving equipment. The following information will help you make the right choice for your diving needs.
Configuration and use of gear
Tech diving gear can be different than recreational diving. Technical divers face different conditions so the configurations of tech dive gear may differ from that of recreational divers. Despite these differences, all of the gear is optimized for the same purpose: keeping a diver comfortable during the dive. Here are some helpful tips about tech dive gear design. The gear configuration should be easy but highly effective. A good regulator will have a high efficiency rating. When diving deep, the density of gas increases, so the equipment should be well-made to cope with this change.
Computers
The most advanced tech dive computer features larger displays and HD screens. These computers can be used for any type of diving from recreational to technical. Some models come with hoseless air integration, digital compasses and GPS features. Safety is paramount. Divers computers that don't accurately calculate decompression factors can cause serious problems.
For cold-water divers, thermal protection
Special Operations Forces personnel are often equipped with neoprene, which allows them to conduct training and operations. They provide only a small amount of insulation at the surface and less than 1/4 of their total insulation at 100 feet. We are currently developing new wetsuit constructions that have R-values within the single digits. These suits will reduce thermal bridge by using innovative multi-layer constructions and stop-gap material.
Rebreathers
You may have wondered about the differences between rebreathers and traditional regulators if you are considering upgrading from open circuit scuba gear. Rebreathers are more time-consuming to maintain than their open circuit counterparts. There is also a greater chance of them causing you harm. Before you buy a rebreather, make sure to research the benefits.
Sidemount BCDs
The STEALTH2.0 is a sidemount BCD for technical divers. It was one of the original designs. The backmount harness has an integrated TEC wing that provides additional security for deep dives and decompression stops. The manufacturer has also developed a bottom-mounted low -pressure inflator. The STEALTH 2.0 is available in single tank, double-tank, or dual-tank configurations.